5–500 m³/hrDissolved Air Flotation (DAF)
Flotation & ClarificationView Details
Flotation & Clarification
Lamella Settlers / Clarifiers
Inclined-plate clarifiers that pack up to ten times the settling area of an open tank into a compact vessel — removing 90–95% of settleable suspended solids with minimal civil works.
What it is
Heetu K-Pack Lamella Settlers use closely spaced inclined plates so that solids only have to settle a short distance before sliding down into a sludge hopper. This dramatically increases effective settling area, letting a compact unit do the work of a much larger conventional clarifier.
With plates angled at 55–60 degrees in polypropylene or stainless steel, and vessels in SS 304/316, FRP or MS, lamella clarifiers are ideal for expansions and space-constrained sites that need high-rate clarification.
Key features
- Inclined plates angled at 55–60 degrees
- Polypropylene or stainless-steel plate options
- Vessel construction in SS 304/316, FRP or MS
- Up to 10× effective settling area vs open tanks
- Capacity from 5 to 250 m³/hr
- Compact footprint for upgrades and retrofits
How it works
Upflow between plates
Pre-treated water flows upward between closely spaced inclined plates.
Solids settle on plates
Suspended solids land on the plate surfaces and slide downward.
Sludge collects below
Solids descend into a sludge hopper for periodic discharge.
Clarified water overflows
Treated water rises and exits via outlet weirs.
Where it is used
Applications
- Primary and secondary clarification
- Metal-hydroxide precipitation treatment
- Desalination pre-treatment
- Capacity upgrades in space-limited plants
- Polishing after chemical conditioning
Industries served
Oil & Gas
Refining
Desalination
General Industry
Why it delivers
- Maximum settling area in minimum footprint
- 90–95% settleable-solids removal
- Reduced civil works and faster installation
- Ideal for capacity expansion in tight spaces
- Low maintenance, passive operation
Engineering edge
- Short settling distance boosts throughput
- Passive operation with no moving parts
- Plate materials tuned to the stream
- Drop-in area gain for existing plants
Technical data
| TSS removal | 90–95% |
| Flow capacity | 5–250 m³/hr |
| Plate angle | 55–60° |
| Plate material | PP · SS |
| Vessel | SS 304/316 · FRP · MS |
| Area gain | up to 10× open tank |
Specifications are indicative. Final design is engineered to your effluent and site conditions.
Why Heetu K-Pack
Engineered to your stream
Every unit is sized to your flow, load and discharge targets — never an off-the-shelf compromise.
Built in-house
Fabricated and QA-tested in our own workshop for controlled, documented quality.
Proven performance
Field-validated removal rates from pilot through full-scale operation.
Lifetime support
Commissioning, spares and responsive after-sales for the life of your plant.
Related solutions
You may also need
5–500 m³/hr
Produced waterInduced Gas Flotation (IGF)
Flotation & ClarificationView Details
API 421API Oil–Water Separators
Oil–Water SeparationView Details
Ready to specify your Lamella Settlers / Clarifiers?
Tell us about your process and we will recommend and size the right configuration.